没有拆卸的修理破裂的发动机块

修复破裂的发动机块可能是一个非常昂贵和耗时的工作。然而,可以使用像纤维锁如纤维锁如纤维锁如纤维锁的产品进行修复的较小裂缝。

转录物:

停止泄漏,开始驾驶!这辆车的发动机过热。反复。过热有时可以由破裂的发动机块,从冷却系统泄漏,或者冷却剂泄漏超过头部垫圈。发动机块中的裂缝可能是昂贵的修复。但是对于KNW纤维锁头垫片和泄漏修复,您可以在20分钟后回到路上。KNW纤维锁是修复裂纹头垫圈和发动机块最先进的产品。
当块或冷却系统中存在裂缝或孔时,系统中的压力会导致热量在裂缝纤维锁周围产生热点,并用三个保护级别密封它们。军用强度纤维在臀位上创造一个互锁的网页。纳米颗粒填充并形成金属的固体键。修理后,CULEX调节器可使发动机保持冷却器。和纤维锁与所有类型的防冻剂兼容。现在,让我告诉你你如何在几分钟内完成自己。没有必要的工具。在开始之前,阅读所有方向,并准备好向您的用户手册查找系统详细信息。您还需要知道冷却系统的容量。这可以在您的用户手册中找到。 Let’s get started. First, make sure the engine is cool enough to safely remove the radiator cap. Next, always wear eye protection and gloves when doing any type of maintenance or repair on your vehicle. Now locate and unscrew the radiator cap. Be careful not to add FiberLock to the oil. Shake the bottle well for 30 seconds and start your car. This is necessary to circulate FiberLock in your cooling system. Very slowly, add the required amount of FiberLock bottle. Replace the radiator cap. Turn the heater on to high. Let your car idle for 15 minutes and you’re done. After the engine cools down it’s always a good idea to check the fluid level of the radiator and add some coolant if it’s low. If the leak persists for more than a week, you can repeat the treatment with FiberLock. But if you’re losing more than a half gallon of coolant in 30 minutes, no cooling system additive will be able to fix your leak and you’ll need a professional repair. KNW products have been stopping vehicle leaks for nearly 80 years. We offer a wide range of products for common needs see our other problem solvers at knw.com. Stop leaks, start driving?