福特6.0L动力冲程真空泵更换提示

关于在6.0L福特动力冲程柴油机上更换动力冲程真空泵的提示。

记录:
更换冲程真空泵。让我们来讨论一下把03年的福特卡车上的真空泵换成6升柴油发动机。现在,因为它是一个柴油发动机它不会有发动机真空。它需要一个这样的真空泵来操作一些东西比如四轮驱动的前轴执行器。如果密封件泄漏或者执行器本身出了问题,真空泵就会烧坏。所以在我们更换真空泵之前,我要确保我们有良好的动力和地面。我们还要确保没有真空泄漏,否则会烧坏我们的新泵。所以置换过程很简单。这里有一个电连接器,我可以把它拔下来。我可以拔掉这里的真空管,然后这里就有几个金属环来固定它。 We can pull them out, and we’ll pop the new one back in place. Now just for illustration purposes, we’ve gone ahead and removed this bracket here and got the whole housing out so you’ll see how these rubber grommets get popped through there. You can cut them off, you can pry, you can pull. Right now I’m just quick pulling it out. I’m going to use a pliers to help pull out the grommets through the bracket here on the new unit. Or we could could work them through by hand. Once it’s done I’m going to bolt it up, put my 1 vacuum line on, plug it in, ensure the system works, and we’re all done. We’ve just gone ahead and replaced the vacuum pump on this Ford truck with a 6 liter power stroke engine.